Previous assignments



  • CARLIMENT capital aquisition, project management and work dissemination,
  • Profiled marketing action of Polish manufacturing technology on the "old" Western European (EU13) markets.




  • An examination of the influence of surface-active additives on grain size and properties of CEM I 42.5R Portland cement,
  • Evaluation of the impact of mercury sorbents on the properties of fly ash from different zones of electrostatic precipitators.




  • Carbide lime waste as a binder in the production of straw pellets,
  • Technology allignment for carbide lime waste deposit.




  • Fly ash from fluidized boiler combustion as a ready mix concrete component,
  • Rating of natural raw materials for application in the railway embankments production technology.




  • Conventional fly ash derived from co frameworks for roads and soil stabilization.




  • Application of natural zeolites from deposits in Kosovo in the industry in Central and Eastern Europe (CEE),
  • Consulting the use of coal combustion products (CCPs) as structural layers of motorways,
  • A novel approach to waste raw materials for cement raw meal composition.




  • Caclcareous gaizes as a complex additive for the production of CEM II/L, CEM II/M i CEM V type cements,
  • Application of coal combustion by-products from fluidized combustion as a high performance concrete (HPC) component,
  • Bottom ash from fluidized bed combustion as time of set regulator.




  • Evaluation of pozzolanic activity of different types of pozzolanic materials by means of thermal analysis (DTA / TG),
  • Comparative evaluation of the impact of various surface-active additives on the fineness and practical properties of cements.




  • Examination of pozzolanic activities of conventional fly ashes from various heat and power plants,
  • The meaning of pozzolanic materials at the beginning of 21st century.




  • Determination of coal combustion products properties from Azoty Tarnów chemical factory,
  • Determination of surface-active additives on fineness and cement properties producet in Górażdże cement plant.




  • Examination of cement kiln dust from electrical precipitators influence on the properties of CEM I cement in Ożarów and Rejowiec cement plants,
  • Influence of fineness and recipe on the properties of CEM II/B-M and CEM V/A cements,
  • Influence of type and amount of applied surface-active additives on the properties of CEM II/B-S cements produced in Górażdże cement plant,
  • Coal combustion products obtained during fluidized bed combustion and possibilities of their rational application.




  • Examination of the influence of the amount of granulated blast furnace slag and its specific surface on the properties of CEM III/A cements,
  • Influence of fineness and applied additives on the properties of CEM II/B-S and CEM II/B-M cements,
  • Optimization of cement CEM V/B compositions in case of Górażdże cement plant,
  • Microscopic examination of cements produced by Górażdże cement plant.




  • Examination of fluidized bed combustion fly ash from Turów power plant on the properties of cement,
  • Examination of aggregates from limestone foundry Podgrodzie,
  • Selection of gypsum calcination method for Nowy Ląd gypsum and anhydrite factory.




  • Determiination of silica fume properties from Łaziska steel plant according to the EN 13263 european standard,
  • Assessment of silica fume as a cement addition - literature overview,
  • Examination of different amounts of silica fume addition influence on the properties of cement and assessment of possibilities of obtaining CEM/A-D 52,5R cement in case of Górażdże cement plant.




  • Determination of fluidized bed combustion bottom ashes from Siersza power plant suitability as a time of set regulator,
  • Determination of sulfurous additives resources for cement industry,
  • Examination of CEM II/B-V cements with the addition of fluidized bed combustion bottom ashes,
  • Monitoring of fluidized bed combustion by-products from Turów power plant properties.




  • Analysis of cement strength deterioration during storage of CEM II/B-SV cement in silos,
  • Examination of physicochemical properties of fluidized bed combustion bottom ashes from Jaworzno II power plant, and assessment of their applicability as a time of set regulator in CEM II/B-V cements.




  • Examination of physicochemical properties of fluidized bed combustion fly ashes from Katowice heat and power plant, and their assessment as a cement additive,
  • Possibilities of application of special binders and mineral materials in underground mining.





  • Technical project of production line of sulfuric binders based on desulphation gypsum, case study of Prevar factory in Skawina,
  • Determination of domestic market of fluidized bed combustion fly ashes.




  • Determination of causes and mechanisms of lumping of cements made by Małogoszcz cement plant, and suggesting actions preventing this phenomena,
  • By-products of fume desulphation and phospogypsum as a potential sulfuric raw materials for Górażdże cement plant,
  • Physicochemical examination of selected sulfuric by-products and assessment of their influence on the properties of cements made by Górażdże cement plant.





  • Synthetic and natural gypsum phase composition fluctuations after heating in 70 - 110oC, as time of set agent, and influence on the properties of cement.




  • Examination of Górażdże cement plant raw meal sinterability corrected with silica fume from Łaziska steel plant.


[ polski ] [ english ]
CEMENT INDUSTRY in Poland ECOLOGY environmental awareness HISTORY 150 years of tradition